Horizontal Machining Center
FM-1075F
Horizontal machining center has high speed, high precion and high reliability structure, has the best high rigity in similar equipment and high power, large torque, heavy cutting characteristics, which can give full play to effcient production and high precion processing performance. Powerful cutting cabilities combined with superion and performance make milling and boring operations easy. Rain shaft screw has pre-stretch, which can elminate the dynamic back-gap and compersate the error caused by temperature in advance, to ensure the machining parts accuracy.
INQUIRE|
Item Model
|
FM-1075F | Unit | |||
|---|---|---|---|---|---|
| Process | |||||
| X axis stroke | 1000 | mm | |||
| Y axis stroke | 750 | mm | |||
| Z axis stroke | 600 | mm | |||
| Distance from spindle center to workbench |
150-900 | mm | |||
| Distance from spindle nose to workbench center |
90-690 | mm | |||
| Workbench | |||||
| Workbench area | 1300×600 | mm | |||
| Maximum load of workbench | 800 | kgf | |||
| T slot(WxNO.xP) | 18x5×100 | mm | |||
| Workbench threaded hole | ✕ | - | |||
| Minimum workbench indexing | 1 | ° | |||
| Spindle | |||||
| Spindle taper | BT50 | - | |||
| Speed of spindle | 6000 | rpm | |||
| Spindle head sleeve aperture | Φ190 | mm | |||
| Spindle power | 11/15 | kW | |||
| Spindle drive form | Belt type | - | |||
| Y axis counterweight form | Nitrogen balancing cylinder | - | |||
| Feed | |||||
| X/Y/Z axis fast moving | 24/20/24 | m/min | |||
| Cutting feed | 1-6000 | mm/min | |||
| Minimum input unit | 0.001 | mm | |||
| Servo motor X/Y/Z torque | 3/3/3 | kW | |||
| X/Y axis rail width | 45/55 | mm | |||
| X/Y axis rail form | Roller guide | - | |||
| Y axis rail form | Hardened rail | - | |||
| Automatic Tool Changing | |||||
| Number of tools | 24 | pcs | |||
| Handle bolts | P-50T(45°) | - | |||
| Maximum tool weight | 18 | kg | |||
| Maximum tool length | 350 | mm | |||
| Maximum tool diameter | Φ112 | mm | |||
| Maximum tool diameter (Without adjacent tool) |
Φ200 | mm | |||
| Tool change time (T to T) | 5 | sec | |||
| Way of changing tool | Knife arm type | - | |||
| APC | |||||
| Number of plates | 1 | pcs | |||
| Exchange way | ✕ | - | |||
| Maximum workpiece rotation diameter | ✕ | mm | |||
| Precision | |||||
| Positioning accuracy | 0.012 | mm | |||
| Repeated positioning accuracy | 0.008 | mm | |||
| Others | |||||
| Floor area (LxW) | 4180x3300 | mm | |||
| Maximum machine height | 3050 | mm | |||
| Machine weight (approx.) | 8000 | kg | |||
| Pneumatic supply | 6~8 | bar | |||
| CP capacity of electric power | 40 | kVA | |||
| Numerical control system | FANUC-0iMF/MITSUBISHI-M80 | - | |||
|
Item Model
|
FM-1075F | ||||
|---|---|---|---|---|---|
| Standard Configuration | |||||
| Electric box heat exchanger | ⚫ | ||||
| Three shaft screw prepull | ⚫ | ||||
| Loose clip tool device | ⚫ | ||||
| Automatic oil feeding and lubrication device | ⚫ | ||||
| Full cover anti chip sheet metal shield | ⚫ | ||||
| Electrical box dustproof device | ⚫ | ||||
| Main shaft nose air curtain anti chip device | ⚫ | ||||
| Machine light | ⚫ | ||||
| Tri-color warning light | ⚫ | ||||
| Rigid tapping | ⚫ | ||||
| Foundation screws and pads | ⚫ | ||||
| Operation and maintenance manual | ⚫ | ||||
| Tool box | ⚫ | ||||
| Spindle Selection | |||||
| Belt type 6000rpm | ⚫ | ||||
| Belt type 8000rpm | ⚪ | ||||
| Two section gear box 6000rpm | ⚪ | ||||
| Spindle oil cooler | ⚫ | ||||
| Spindle center outlet(CTS) | ⚪ | ||||
| Control System | |||||
| FANUC-0iMF | ⚫ | ||||
| SIEMENS-828D | ⚪ | ||||
| MITSUBISHI-M80 | ⚪ | ||||
| Kane emperor | ⚪ | ||||
| Cooling System | |||||
| Cuting liquid cooling system | ⚪ | ||||
| Spindle ring spray | ⚫ | ||||
| Blowing artifacts | ⚫ | ||||
| Oil Water Separation System | |||||
| Specific gravity oil-water separation device |
⚫ | ||||
| Disc type oil-water separator | ⚪ | ||||
| Chip Removal System | |||||
| Chassis chip flushing function | ⚫ | ||||
| Top cover shower function | ⚪ | ||||
| Clean water gun, air gun | ⚫ | ||||
| Chip removal machine | ⚪ | ||||
|
Item Model
|
FM-1075F | ||||
|---|---|---|---|---|---|
| Lubrication system | |||||
| Automatic oil feeding lubricating device | ⚫ | ||||
| Automatic grease feeding lubricating device | ⚪ | ||||
| ATC | |||||
| BT50 Tool shank type | ⚫ | ||||
| HSK Tool shank type | ⚪ | ||||
| 24T Disc type knife store | ⚫ | ||||
| 30T Disc type knife store | ⚪ | ||||
| Error compensation system | |||||
| X/Y axis grating ruler | ⚪ | ||||
| X/Y/Z axis grating ruler | ⚪ | ||||
| Electrical system accessories | |||||
| Front door safety devices | ⚪ | ||||
| Front door safety devices(CE) | ⚪ | ||||
| Automatic power failure system | ⚫ | ||||
| Electric box heat exchanger | ⚫ | ||||
| Electric box air conditioner | ⚪ | ||||
| Tool and workpiece measuring system | |||||
| Automatic tool length tester | ⚪ | ||||
| Tool damage detector | ⚪ | ||||
| Workpiece measuring system | ⚪ | ||||
| Other accessory options | |||||
| APC side automatic door | ⚪ | ||||
Note: ✕ not Optional ⚫ Standard Configuration ⚪ Optional Configuration
Due to our continuous development and improvement, the above specifications and design are subject to change without prior notice.
High Speed
High Precision
Large Bearing Capacity
Small Occupation of Land
Strong Rigidity
Introduction of HMC body structure
Adopt mature and stable standard inverted "T" structure, widened base, and sliding saddle to improve rigidity, fast-moving and good stability: three-axis guide rail is imported heavy roller linear guide and pre-loading V3 level, with high bearing capacity, stable accuracy.
Reach out, and our sales team will respond promptly with the details you need!
