Vertical Machining Center
FV-1500A
The best spindle configuration, the spindle center line is close to the z-axis slide rail, greatly reducing the influence of thermal displacement and cutting moment can produce bending deformation, to ensure the best accuracy. The whole machine structure has excellent strength and stability. Y axis uses four heavy-duty roller guide rail designs so that the work table has heavy cutting stability.
INQUIRE|
Item Model
|
FV-1500A | Unit | |||
|---|---|---|---|---|---|
| Process | |||||
| X axis stroke | 1500 | mm | |||
| Y axis stroke | 800 | mm | |||
| Z axis stroke | 700 | mm | |||
| Distance from spindle nose to workbench |
175-875 | mm | |||
| Workbench | |||||
| Workbench area | 1600×800 | mm | |||
| Maximum load of workbench | 1600 | kgf | |||
| T slot(WxNO.xP) | 18x5×147.5 | mm | |||
| Spindle | |||||
| Spindle taper | BT50 | - | |||
| Speed of spindle | 6000 | rpm | |||
| Spindle head sleeve aperture | Φ190 | mm | |||
| Spindle power | 15/18.5 | kW | |||
| Spindle drive form | Belt type | - | |||
| Z axis counterweight form | Nitrogen balancing cylinder | - | |||
| Feed | |||||
| X/Y/Z axis fast moving | 20/20/12 | m/min | |||
| Cutting feed | 1-8000 | mm/min | |||
| Minimum input unit | 0.001 | mm | |||
| Servo motor X/Y/Z torque | 3/3/3 | kW | |||
| X/Y axis rail width | 55/45 | mm | |||
| X/Y axis rail form | Roller linear guide | - | |||
| Z axis rail form | Hardened linear rail | - | |||
| Automatic Tool Changing | |||||
| Number of tools | 24 | pcs | |||
| Handle bolts | P-50T(45°) | - | |||
| Maximum tool weight | 18 | kg | |||
| Maximum tool length | 300 | mm | |||
| Maximum tool diameter | Φ112 | mm | |||
| Maximum tool diameter (Without adjacent tool) |
Φ200 | mm | |||
| Tool change time (T to T) | 5 | sec | |||
| Way of changing tool | Knife arm type | - | |||
| Precision | |||||
| Positioning accuracy | 0.012 | mm | |||
| Repeated positioning accuracy | 0.008 | mm | |||
| Others | |||||
| Floor area (LxW) | 4500x3900 | mm | |||
| Maximum machine height | 3100 | mm | |||
| Machine weight (approx.) | 1.5 | Ton | |||
| Pneumatic supply | 6~8 | bar | |||
| CP capacity of electric power | 35 | kVA | |||
| Numerical control system | FANUC-0iMF/MITSUBISHI-M80 SYNTEC-22MA/SIMENS-828D/840D |
- | |||
|
Item Model
|
FV-1500A | ||||
|---|---|---|---|---|---|
| Standard Configuration | |||||
| Electric box heat exchanger | ⚫ | ||||
| Three shaft screw prepull | ⚫ | ||||
| Loose clip tool device | ⚫ | ||||
| Automatic oil feeding dna lubrication device | ⚫ | ||||
| Full cover anti chio sheet metal shield | ⚫ | ||||
| Main shaft nose air curtain anti chip device | ⚫ | ||||
| Machine light | ⚫ | ||||
| Tri-color warning light | ⚫ | ||||
| Rigid tapping | ⚫ | ||||
| Foundation screws and pads | ⚫ | ||||
| Operation and maintenance manual | ⚫ | ||||
| Tool box | ⚫ | ||||
| Spindle Selection | |||||
| Belt type 6000rpm | ⚫ | ||||
| Belt type 8000rpm | ⚪ | ||||
| Belt type 10000rpm | ✕ | ||||
| Belt type 12000rpm | ✕ | ||||
| Direct type 12000pm | ✕ | ||||
| Direct type 15000pm | ✕ | ||||
| Two section gear box 6000rpm | ⚪ | ||||
| Spindle oil cooler | ⚫ | ||||
| Spindle center outlet(CTS) | ⚪ | ||||
| Control System | |||||
| FANUC-0iMF | ⚫ | ||||
| SIEMENS-828D | ⚪ | ||||
| MITSUBISHI-M80 | ⚪ | ||||
| Kane emperor | ⚪ | ||||
| Cooling System | |||||
| Cuting liquid cooling system | ⚪ | ||||
| Spindle ring spray | ⚫ | ||||
| Blowing artifacts | ⚫ | ||||
| Chip removal system | |||||
| Chassis chip flushing function | ⚫ | ||||
| Top cover shower function | ⚪ | ||||
| Clean water gun, air gun | ⚫ | ||||
| Chip removal machine | ⚪ | ||||
|
Item Model
|
FV-1500A | ||||
|---|---|---|---|---|---|
| Oil water separation system | |||||
| Specific gravity oil-water separation device | ⚫ | ||||
| Disc type oil-water separator | ⚪ | ||||
| Lubrication system | |||||
| Automatic oil feeding lubricating device | ⚫ | ||||
| Automatic grease feeding lubricating device | ⚪ | ||||
| ATC | |||||
| BT40 Tool shank type | ✕ | ||||
| BT50 Tool shank type | ⚫ | ||||
| HSK Tool shank type | ⚪ | ||||
| 24T Disc type knife store | ⚫ | ||||
| 30T Disc type knife store | ⚪ | ||||
| Error compensation system | |||||
| X/Y axis grating ruler | ⚪ | ||||
| X/Y/Z axis grating ruler | ⚪ | ||||
| Electrical system accessories | |||||
| Front door safety devices | ⚪ | ||||
| Front door safety devices(CE) | ⚪ | ||||
| Automatic power failure system | ⚫ | ||||
| Electric box neat exchanger | ⚫ | ||||
| Electric box air conditioner | ⚪ | ||||
| Tool and workpiece measuring system | |||||
| Automatic tool length tester | ⚪ | ||||
| Tool damage detector | ⚪ | ||||
| Workpiece measuring system | ⚪ | ||||
| Other accessory options | |||||
| The fourth (4/5) axis | ⚪ | ||||
| Pilar heightening | ⚪ | ||||
| Front automatic door | ⚪ | ||||
| American back protection sheet metal | ⚫ | ||||
Note: ✕ not Optional ⚫ Standard configuration ⚪ Optional configuration
Due to our continuous development and improvement, the above specifications and design are subject to change without prior notice.
Perfect combination of high speed and high rigidity
The processing range is larger than the general model, and the rigidity of the machine tool is greatly enhanced, so that the machine tool can absorb the vibration of re-cutting more effectively during processing, so as to improve the accuracy and smoothness of the workpiece. Through the analysis of finite element structure, a large number of reinforcing bars are used the casting to optimize the mechanical structure and ensure the rigidity and stability of the whole machine.
The casting structure adopts the strengthening design, the casting wall thickness is reasonable, the configuration of the strengthening rib is careful, to build a large rigidity and high precision.
Large diameter precision ball screw, driven by servo motor straight knot, supported by special bearings for ball screw, power can be effectively transmitted.
The driving torque is reasonable enough to bear the heavy cutting load.
The ergonomic panel design makes it easy and comfortable to operate.
Used for efficient heavy-cutting processing, mass production of mechanical vehicle parts, precision parts, mold processing, and production.
Tool change system
Tool change system
24T arm cutter library, controlled by high precision CAM drive mechanism, is solid, durable and no need for aftercare. Arbitrary position knife selection ability to ensure fast, smooth, and reliable operation.
High speed and high precision rail
High speed and high precision rail
Y-axis adopts four 55mm column damask rails, with large span column, the heavy cutting and bearing capacity of a hard rail machine, at the same time it has high-speed, high precision, long life special paste.
Chip removal system design
Chip removal system design
The design of a double spiral chain plate chip discharging machine can be used to collect all kinds of roll, block, and strip chips, which can effectively improve the operating environment, reduce labor intensity and improve the degree of automation of the whole machine.
Low center of gravity base design
Low center of gravity base design
The machine body adopts the design of a low center of gravity, which effectively reduces the center of gravity of the machine tool, and further enhances the stability of the high-speed movement of the moving parts of the machine tool. The high strength column and the bed of low center of gravity build the foundation of high performance of the machine tool. Four-rail base provides the best support and stability of the whole machine.
High Quality Gearbox (Optional)
All gears are made of alloy steel, hardened steel, and JIS-0 precision grinding material. Provide optimal high precision and low noise characteristics.
The internal bearings of the gearbox are cooled by forced circulation. The perfect cooling system can reduce the heat to a minimum degree, and ensure the machining accuracy.
Full-tooth high and low two-stage variable speed driving spindle box, with wide speed range and high horsepower, can bear heavy cutting load and high-speed processing.
Spindle Center Outlet
Add the spindle center water system, cutting fluid through the spindle center, ejected by the tooltip, can directly act on the work-piece and tool cutting edge, the heat source of the cutting away, while the high-pressure cutting fluid can remove the work-piece surface residue to ensure processing quality, suitable for deep hole processing parts
Grating Scale or Optical Linear Scale
Three-axis grating ruler can be added to improve the accuracy of processing, reduce the error caused by environmental temperature changes, can produce more precise products
Multidimensional Machining
With the innovation of technology, the current D3 processing has been difficult to meet the following processing needs, our company added the fourth axis and the fifth axis on the basis of the three axis, to solve the multi-angle processing difficulties and improve production efficiency
Automatic Tool Measuring Series
According to the tool length value, diameter, and wear detection. TS27R inputs the controller automatically for compensation after measuring and is easy to operate
Chip Conveyor
Reach out, and our sales team will respond promptly with the details you need!
