Drilling and Tapping Center
FT-700V
The design and development of FT series drilling and tapping center meet the requirements of customers for high speed and high productivity vertical drilling and tapping center.
The overall layout of FT series driling center is vertical frame structure, the overall structure compact, can bear the heavy load duning processing, high speed displacement can keep no vibration, no deformation, suitable for processing automobile, locomotive parts and small generator parts.
INQUIRE|
Item Model
|
FT-700V | Unit | |||
|---|---|---|---|---|---|
| Process | |||||
| X axis stroke | 700 | mm | |||
| Y axis stroke | 400 | mm | |||
| Z axis stroke | 330 | mm | |||
| Distance from spindle nose to workbench |
150~480 | mm | |||
| Workbench | |||||
| Workbench area | 800×420 | mm | |||
| Maximum load of workbench | 250 | kgf | |||
| T slot(WxNO.xP) | 14x3×125 | mm | |||
| Spindle | |||||
| Spindle taper | BT30 | - | |||
| Speed of spindle | 20000 | rpm | |||
| Spindle motor power | 5.5 | kW | |||
| Spindle drive form | Direct type | - | |||
| Feed | |||||
| X/Y/Z axis fast moving | 48/48/48 | m/min | |||
| Cutting feed | 1-10000 | mm/min | |||
| Minimum input unit | 0.001 | mm | |||
| X/Y/Z motor power | 1.5/1.5/3.0 | kW | |||
| X/Y/Z axis rail width | 30/30/30 | mm | |||
| Automatic Tool Changing | |||||
| Number of tools | 21 | pcs | |||
| Tool change time (T to T) | 1.4 | sec | |||
| Way of changing tool | Arm claraobing type | - | |||
| Maximum blade diameter | 60/80 | mm | |||
| Maximum tool length / Tool weight | 200/2 | mm/kg | |||
| Precision | |||||
| Positioning accuracy | 0.008 | mm | |||
| Repeated positioning accuracy | 0.004 | mm | |||
| Others | |||||
| External dimension(LxWxH) | 1900x2360x2220 | mm | |||
| Machine weight (approx.) | 3.7 | Ton | |||
| Pneumatic supply | 6 | bar | |||
| CP capacity of electric power | 20 | kVA | |||
| Numerical control system | FANUC-0iMF/MITSUBISHI-M80 | - | |||
|
Item Model
|
TV-600L | ||||
|---|---|---|---|---|---|
| Standard Configuration | |||||
| Electric box heat exchanger | ⚫ | ||||
| Three shaft screw prepull | ⚫ | ||||
| Loose clip tool device | ⚫ | ||||
| Automatic oil feeding and lubrication device | ⚫ | ||||
| Full cover anti chip sheet metal shield | ⚫ | ||||
| Electrical box dustproof device | ⚫ | ||||
| Main shaft nose air curtain anti chip device | ⚫ | ||||
| Machine light | ⚫ | ||||
| Tri-color warning light | ⚫ | ||||
| Rigid tapping | ⚫ | ||||
| Foundation screws and pads | ⚫ | ||||
| Operation and maintenance manual | ⚫ | ||||
| Tool box | ⚫ | ||||
| Spindle Selection | |||||
| Direct type 20000pm | ⚫ | ||||
| Direct type 12000pm | ⚪ | ||||
| Direct type 15000pm | ⚪ | ||||
| Spindle oil cooler | ⚫ | ||||
| Spindle center outlet(CTS) | ⚪ | ||||
| Control System | |||||
| FANUC-0iMF | ⚫ | ||||
| SIEMENS-828D | ⚪ | ||||
| MITSUBISHI-M80 | ⚪ | ||||
| Kane emperor | ⚪ | ||||
| Cooling System | |||||
| Cuting liquid cooling system | ⚪ | ||||
| Blowing artifacts | ⚫ | ||||
| Chip Removal System | |||||
| Chassis chip flushing function | ⚪ | ||||
| Top cover shower function | ⚪ | ||||
| Clean water gun, air gun | ⚫ | ||||
| Chip removal machine | ⚪ | ||||
|
Item Model
|
TV-600L | ||||
|---|---|---|---|---|---|
| Oil water separation system | |||||
| Specific gravity oil-water separation device | ⚫ | ||||
| Disc type oil-water separator | ⚪ | ||||
| Lubrication system | |||||
| Automatic oil feeding lubricating device | ⚫ | ||||
| Automatic grease feeding lubricating device | ⚪ | ||||
| ATC | |||||
| BT30 Tool shank type | ⚫ | ||||
| 16T Geneva type knife store | ⚫ | ||||
| 21T Geneva type knife store | ⚪ | ||||
| Error compensation system | |||||
| X/Y axis grating ruler | ⚪ | ||||
| X/Y/Z axis grating ruler | ⚪ | ||||
| Electrical system accessories | |||||
| Front door safety devices | ⚪ | ||||
| Front door safety devices(CE) | ⚪ | ||||
| Automatic power failure system | ⚫ | ||||
| Electric box neat exchanger | ⚫ | ||||
| Electric box air conditioner | ⚪ | ||||
| Tool and workpiece measuring system | |||||
| Automatic tool length tester | ⚪ | ||||
| Tool damage detector | ⚪ | ||||
| Workpiece measuring system | ⚪ | ||||
| Other accessory options | |||||
| The fourth (4/5) axis | ⚪ | ||||
| Pillar heightening | ⚪ | ||||
| Front automatic door | ⚪ | ||||
| American back protection sheet metal | ⚫ | ||||
Due to our continuous development and improvement, the above specifications and design are subject to change without prior notice.
knife changing time 1.4s
Cutting tool changing time 1.9s
BT30 spindle and high-efficiency servo tool library are used to achieve high-speed movement and optimal exchange.
Ancient CAM motor to servo motor drive, can achieve no interval stop, fast exchange the furthest distance cutter, through the optimization of the cutter library and improve the perfect match with the Z-axis movement, greatly shorten the cutting of the cutting tool changing time.
High rigidity mechanical construction
The overal layout of the machine is a vertical frame structure, the base is wide and solid, the column is a box structure, and the saddle structure is solid and withstand the heavy load during processing, and can keep no vibration and deformation through the high-speed displacement.
High response servo system
The servomotor responds fast and the delay is almost zero
Servomotor's pursuit of cutting capacity is manifested in the adoption of high rigidity mechanical structure and high power spindle motor, which greatly expands the cutting capacity range of high efficiency machining and heavy cutting machninig.
Direct connection, high precision, high rigidity spindle head
Spindle speed uo to 20000rpm, with small power loss, low vibration, low noise, low temperature rise and other characteristics, to ensure high precision processing and high quality of rigid tapping. The spindle can realize step-less speed regulation within its speed range, to ensure the safety and reliability of loose clamping tool of the spindle. The spindle is equipped with contact-less switch feedback, which can realize the automatic detection of the clamping and loosening of the tool.
Reach out, and our sales team will respond promptly with the details you need!
