Vertical Machining Center
FV-1100A
FV-1100A features reinforced worktable saddle and 45mm heavy-duty roller guides on all three axes. The wide guideway span ensures stability during movement, with 6-block design on the X and Z axes to enhance load-bearing rigidity. This model offers long travel and high rigidity, fully meeting most steel machining requirements.
INQUIRE|
Item Model
|
FV-1100A | Unit | |||
|---|---|---|---|---|---|
| Process | |||||
| X axis stroke | 1100 | mm | |||
| Y axis stroke | 600 | mm | |||
| Z axis stroke | 600 | mm | |||
| Distance from spindle nose to workbench |
120~720 | mm | |||
| Workbench | |||||
| Workbench area | 1200×600 | mm | |||
| Maximum load of workbench | 800 | kgf | |||
| T slot(WxNO.xP) | 18x5×100 | mm | |||
| Spindle | |||||
| Spindle taper | BT40 | - | |||
| Speed of spindle | 10000 | rpm | |||
| Spindle head sleeve aperture | Φ150 | mm | |||
| Spindle power | 11/15 | kW | |||
| Spindle drive form | Belt type | - | |||
| Z axis counterweight form | None | - | |||
| Feed | |||||
| X/Y/Z axis fast moving | 36/36/36 | m/min | |||
| Cutting feed | 1-10000 | mm/min | |||
| Minimum input unit | 0.001 | mm | |||
| Servo motor X/Y/Z torque | 3/3/3 | kW | |||
| X/Y axis rail width | 45/45/45 | mm | |||
| X/Y axis rail form | Roller linear guide | - | |||
| Z axis rail form | Roller linear guide | - | |||
| Automatic Tool Changing | |||||
| Number of tools | 24 | pcs | |||
| Handle bolts | P-40T(45°) | - | |||
| Maximum tool weight | 8 | kg | |||
| Maximum tool length | 300 | mm | |||
| Maximum tool diameter | Φ80 | mm | |||
| Maximum tool diameter (Without adjacent tool) |
Φ120 | mm | |||
| Tool change time (T to T) | 1.8 | sec | |||
| Way of changing tool | Knife arm type | - | |||
| Precision | |||||
| Positioning accuracy | 0.008 | mm | |||
| Repeated positioning accuracy | 0.005 | mm | |||
| Others | |||||
| Machine dimension(LxWxH) | 3100x2900x2600 | mm | |||
| Machine weight (approx.) | 6500 | kg | |||
| Pneumatic supply | 6~8 | bar | |||
| CP capacity of electric power | 25 | kVA | |||
| Numerical control system | FANUC-0iMF/MITSUBISHI-M80 SYNTEC-22MA/SIMENS-828D/840D |
- | |||
|
Item Model
|
FV-1100A | ||||
|---|---|---|---|---|---|
| Standard Configuration | |||||
| Electric box heat exchanger | ⚫ | ||||
| Three shaft screw prepull | ⚫ | ||||
| Loose clip tool device | ⚫ | ||||
| Automatic oil feeding dna lubrication device | ⚫ | ||||
| Full cover anti chio sheet metal shield | ⚫ | ||||
| Main shaft nose air curtain anti chip device | ⚫ | ||||
| Machine light | ⚫ | ||||
| Tri-color warning light | ⚫ | ||||
| Rigid tapping | ⚫ | ||||
| Foundation screws and pads | ⚫ | ||||
| Operation and maintenance manual | ⚫ | ||||
| Tool bo✕ | ⚫ | ||||
| Spindle selection | |||||
| Belt type 6000rpm | ✕ | ||||
| Belt type 8000rpm | ⚫ | ||||
| Belt type 10000rpm | ⚪ | ||||
| Belt type 12000rpm | ⚪ | ||||
| Direct type 12000pm | ⚪ | ||||
| Direct type 15000pm | ⚪ | ||||
| Two section gear box 6000rpm | ✕ | ||||
| Spindle oil cooler | ⚪ | ||||
| Spindle center outlet(CTS) | ⚪ | ||||
| Control System | |||||
| FANUC-0iMF | ⚫ | ||||
| SIEMENS-828D | ⚪ | ||||
| MITSUBISHI-M80 | ⚪ | ||||
| Kane emperor | ⚪ | ||||
| Cooling System | |||||
| Cuting liquid cooling system | ⚪ | ||||
| Spindle ring spray | ⚫ | ||||
| Blowing artifacts | ⚫ | ||||
| Chip Removal System | |||||
| Chassis chip flushing function | ⚫ | ||||
| Top cover shower function | ⚪ | ||||
| Clean water gun, air gun | ⚫ | ||||
| Chip removal machine | ⚪ | ||||
|
Item Model
|
FV-1100A | ||||
|---|---|---|---|---|---|
| Oil water separation system | |||||
| Specific gravity oil-water separation device | ⚫ | ||||
| Disc type oil-water separator | ⚪ | ||||
| Lubrication system | |||||
| Automatic oil feeding lubricating device | ⚫ | ||||
| Automatic grease feeding lubricating device | ⚪ | ||||
| ATC | |||||
| BT40 Tool shank type | ⚫ | ||||
| BT50 Tool shank type | ⚪ | ||||
| HSK Tool shank type | ⚪ | ||||
| 24T Disc type knife store | ⚫ | ||||
| 30T Disc type knife store | ⚪ | ||||
| Error compensation system | |||||
| X/Y axis grating ruler | ⚪ | ||||
| X/Y/Z axis grating ruler | ⚪ | ||||
| Electrical system accessories | |||||
| Front door safety devices | ⚪ | ||||
| Front door safety devices(CE) | ⚪ | ||||
| Automatic power failure system | ⚫ | ||||
| Electric box neat exchanger | ⚫ | ||||
| Electric box air conditioner | ⚪ | ||||
| Tool and workpiece measuring system | |||||
| Automatic tool length tester | ⚪ | ||||
| Tool damage detector | ⚪ | ||||
| Workpiece measuring system | ⚪ | ||||
| Other accessory options | |||||
| The fourth (4/5) axis | ⚪ | ||||
| Pilar heightening | ⚪ | ||||
| Front automatic door | ⚪ | ||||
| American back protection sheet metal | ⚫ | ||||
Note: ✕ not Optional ⚫ Standard configuration ⚪ Optional configuration
Due to our continuous development and improvement, the above specifications and design are subject to change without prior notice.
It is characterized by lightweight construction, a low expansion coefficient, and high hardness, which significantly minimize thermal effects and centrifugal forces at high rotational speeds, thereby greatly extending the lifespan of the spindle
BT-40 belt-driven/direct-drive spindle, with speeds of 8000 / 10000 / 12000 / 15000 rpm
Uses a disc-type 24-tool magazine, providing fast tool changes and excellent stability
The annular water spray device surrounding the spindle provides optimal cooling for the workpiece and tools, extending tool life and enhancing the surface finish of the workpiece
Precision Ball Screw
Precision Ball Screw
High-precision double-nut ball screws on all three axes, with preloaded tension and end support locking, eliminate backlash and compensate for thermal expansion, ensuring accurate positioning
Z-Axis Linear Guide with Six Blocks
Z-Axis Linear Guide with Six Blocks
The Z-axis is equipped with two linear guides and six blocks, enhancing machining stability. The three-axis roller guides ensure high precision and rigidity
High-Rigidity Mechanical Design
The castings are cast by advanced resin sand molding and then tempered, the material is stable, to ensure long-term high-speed cutting accuracy. The spindle uses a BT40-Φ150 long nose spindle that is produced in Taiwan and has strong cutting ability. The spindle is equipped with knife blowing, to ensure the handle is clean, to avoid the spindle from inhaling impurities while changing the knife
The internal protection has no crumbs to strike
The tightly sealed cover prevents the coolant from contaminating the guide rail of the machine tool and isolates the iron filings from entering, thus prolonging the service life of the guide rail of the machine tool and ensuring the accuracy of the host machine tool. Effectively reduce the penetration of cutting fluid and metal dust, and increase the service life of the inner protective cover
Spindle Center Outlet
Add the spindle center water system, cutting fluid through the spindle center, ejected by the tooltip, can directly act on the work-piece and tool cutting edge, the heat source of the cutting away, while the high-pressure cutting fluid can remove the work-piece surface residue to ensure processing quality, suitable for deep hole processing parts
Grating Scale or Optical Linear Scale
Three-axis grating ruler can be added to improve the accuracy of processing, reduce the error caused by environmental temperature changes, can produce more precise products
Multidimensional Machining
With the innovation of technology, the current D3 processing has been difficult to meet the following processing needs, our company added the fourth axis and the fifth axis on the basis of the three axis, to solve the multi-angle processing difficulties and improve production efficiency
Automatic Tool Measuring Series
According to the tool length value, diameter, and wear detection. TS27R inputs the controller automatically for compensation after measuring and is easy to operate
Chip Conveyor
Reach out, and our sales team will respond promptly with the details you need!
